A Centena Group Company

ECDIS JAN-2000

Categories: ,

Features

The second generation JAN-2000 integrates a new, more powerful processor, designed to deliver the high performance standard while still keeping the ECDIS an economical choice.

jan2000feature_fig02a

Economic solution

The JAN-2000, a fully type approved system, is a highly cost-effective solution for mid-small size ships & workboats. The number of serial ports tripled to 9 available as standard while excluding function as TCS and radar overlay. And with such standardized interface configuration JAN-2000 can also be considered as an economical back-up solution for our full featured JAN-901B/701B, as commonly installed on large vessels.

jan2000feature_fig02b
jan2000feature_fig03

New processor

The JAN-2000 comes standard with the same processor that is also found on the JAN-901B/701B. Feedback from captains, factory testing and benchmarks show the new processor is a fast improvement. Especially remarkable is the operational performance running very smooth and speedy when changing range scale or dragging the chart.

Checklist

There are many aspects to a successful implementation of ECDIS on your vessel or fleet. Here are a few examples which may be helpful for this multi-stage process.

jan2000feature_fig05
jan2000operation_fig01

Dedicated keyboard

Our dedicated keyboard allows you to carry out all operations simply by using the keyboard or trackball. The responsive feel keys allow logical and precise operation, even under heavy sea conditions.

Back up via LAN

The JAN-2000 ECDIS can directly be connected via LAN to JRC’s VDR and S-VDR. This way, you can easily backup important data, without the need for additional interfaces.

Grounding avoidance

As standard, the JAN-2000 integrates a grounding avoidance function, which protects vessels from collision and entering dangerous areas. This system allows real-time display of the ship’s position on electronic charts, allowing to easily avoiding routes for dangerous areas. You can simply make a crossing warning and it is possible to check safety contour lines and dangerous at the route planning stage.

jan2000operation_fig04

UPS built in

The JAN-2000 has a small Uninterruptible Power Supply (UPS) built in as standard, holding up to 60 seconds until OS closes automatically.

Regulations

IMO amendments to the international SOLAS convention make it compulsory to fit an ECDIS. The legislation will be phased by vessel type and size and will eventually apply to almost all large merchant ships started July 2012. A single ECDIS may be used for navigation but it requires a backup by paper charts or a secondary ECDIS. (If you use ECDIS as a primary means of navigation, it’s essential to understand both your flag state and class society requirements for installation and operator certification.)

jan2000operation_fig05

Also, as ECDIS is a total change from paper charts, the master, officers and other watch keeping bridge officers should as a minimum undertake generic training, followed by a JRC type specific (familiarization) training.

Type specific training

jan2000operation_fig06JRC is working globally with various dedicated training establishments and distributors that provide JRC type specific training. Today, close to 10,000 bridge officers passed the JRC TST course. On jrceurope.com you can find all approved ECDIS training locations.

Flexible black box configuration

The JAN-2000 consist of a 19 or 23-inch display (option), processor and keyboard, allowing for simple configuration and flexible installation approach. It is also possible to install selected third party displays as alternative.

jan2000system_fig02

Advanced route planning

The advanced nature of JRC’s new JAN-2000 ECDIS allows route planning in different ways. Either plan your route by using the table editor, while displaying current waypoint or graphically draw your next waypoint on the chart. Editing the route is just as simple as inserting. Dedicated menus are readily available to assist the mariner in effective route planning. Not only can you save the routes, but import favorite or commonly used files, even from previously ECDIS models, using industry-standard CSV format.

During the voyage, you can add an alternative route, which can be displayed simultaneously. You can move, insert, add and delete waypoints instantly and easily exchange the alternative route with route in progress.

Man Overboard

Some items could strike you on the vessel, a slippery deck or unexpected movement of the vessel are situations in which a person may possibly fall of the vessel. The JAN-2000 integrates a single-press Man Overboard (MOB) operation. Instantly, a dedicated symbol arises on the screen, providing a range detailed info such as positioning, bearing, range and time till arriving at MOB. This emergency system enables immediate and accurate search and rescue efforts.

Multi view

Multiple and wide screen viewing is possible with the new JAN-2000. You can divide the chart screen into two sections, in which the same or different charts can be displayed, in a mixture of ways. In this field of view, it provides a ‘look-ahead’ capability, especially useful in coastal areas. With the wide screen view function, an additional screen in the display area, showing a segment of the chart, allows viewing at a glance.

jan2000system_fig04

In the box

Processor
Keyboard
e-Token (C-Map Ed.3)
Spare parts
Manuals

Options

19-inch display
NWZ-173-E
23-inch display
NWZ-170-E
NSK unit
NCT-4106A
Hub
5EZQM00009
Printer
7HPNA4003
Model JAN-2000
IMO compliant
Display 19-inch (1280 by 1024 pixels), 23-inch (1600 by 1200 pixels)
Bearing indication North up, Course up (simultaneously in multi view)
Presentation mode True, Relative, Free motion
Multi view 9 display modes available
Scale, Range 1:1.000 to 1:75.000.000, 0.125 to 120 NM
Vector charts ENC, C-Map Ed. 3 (AVCS ENC pre-installed, e-Token C-Map supplied)
Raster charts ARCS
Route planning Graphical, Numberical (Route editing, Alternative route editing, Safety check of planning route)
Safety check Grounding, Obstruction, Dangerous areas
Import/export Yes, CSV format
Plotting Own position, Track
TT tracking 200 targets
AIS tracking 300 (sleeping+activated), Class A+B
AIS/TT alarms CPA, TCPA
Navigation monitoring Own ship’s position, Crossing safety contour, Approaching obstruction and prohibited areas, Cross track error, Arrival at waypoint, Off course, Dragging anchor
Licensing Static, Dynamic (C-Map)
Serial input 9 standard + 1 keyboard
LAN 2 ports (1000 Mbps)
USB 4 ports: 1 for e-Token dongle, 1 for HASP (ECDIS license key), 1 for printer (option), 1 for import/export
Import/export Route, Chart files, Logbook (via USB, Harddisk)
Route transfer via LAN¹ Share active route to JRC radar (JMA-900B, 9100, 7100, 5300Mk2)
Share route (stored in memory) to/from JRC (D)GPS (JLR-7500/7800)
Share info via LAN¹ Network printer: screen, route, logbook, RPS: route planning, Conning: monitoring navigation and alarms, VDR/S-VDR: sensor data back up, RMS
Power supply voltage 100-115V/200-230V AC ±10%, 50/60Hz , Consumption: less than 250VA²
Ambient conditions Temperature: -15 to 55°C (operating)
Relative humidity: 0% to 93% non-condensingsince1915JAN

1. Hub may be required.
2. Consumption includes 19-inch display (NWZ-173-E)

jan2000_dimension01
jan2000_dimension02
jan2000_dimension03
jan2000_dimension04